Laser XD Accessories

In Basket : 0 Items
Total : £0.00

Sort list by :

Part Code

Product Name

Price

XD Laser Harken Power Pack

Part code : 1515

Price : £193.11
( price including VAT )

The complete Harken outhaul and downhaul system. Includes all blocks, rope, fittings, XD clew strap and instructions.

XD Harken Vang Complete

Part code : 1520

Price : £178.80
( price including VAT )

The complete Harken kicker system. Includes all ropes, blocks, fittings and instructions.

Carbon Tiller plus a tiller extension for just £30 more

Part code : 1642

Price : £190.00
( price including VAT )

The Laser Carbon Tiller and extension. One of the strongest Tillers on the market. It took Laser two years to produce this amazing Tiller but with the help of Paul Goodison we finally managed it. The Tiller is light and stiff, coupled with a unique ramp that guides the traveler block with ease over the tiller.

XD Harken Vang Base Unit

Part code : 1541

Price : £125.00
( price including VAT )

Harken kicker swivel unit.

XD Fredrickson Ratchet Block

Part code : 3610FR

Price : £60.25
( price including VAT )

Light and tough ratchet block with close ratchet clicks for increased control.

Carbon Tiller Extension 22mm

Part code : 1638

Price : £60.00
( price including VAT )

The Laser Carbon Tiller Extension is 1.25m long and comes in 2 diameters the 25mm and 22mm - The rubber flexi joint is screwed in for ease and is easy to replace during races, if needed...

Carbon Tiller Extension 25mm

Part code : 1643

Price : £60.00
( price including VAT )

The Laser Carbon Tiller Extension is 1.25m long and comes in 2 diameters the 25mm and 22mm - The rubber flexi joint is screwed in for ease and is easy to replace during races, if needed...

Harken Clew Sleeve

Part code : 1560

Price : £25.00
( price including VAT )

ISAF and ILCA have approved the new Laser clew sleeve for competition.

XD Harken 16mm Double Air Block And Becket

Part code : 1549

Price : £22.50
( price including VAT )

Harken kicker system block. - High working loads - Use with small diameter high tech line - Stainless steel sideplates - Stainless steel balls in grooved race Standard Features - Sheave dia.?16 mm (5/8") - Max line dia.?5 mm (7/32")

XD Cleat Plate

Part code : 1526

Price : £22.00
( price including VAT )

Base plate for outhaul cleats.

XD Harken Micro Cam Matic Cleat

Part code : 1546

Price : £22.00
( price including VAT )

Cleat for use with base plate and X treme fairleads. - Pawls open/close easily using ball bearings - Engage line without drawing through pawls - Precise line adjustment - Minimal slippage - Smooth teeth grip lines - Line held by greatest number of teeth - UV-stabilized, carbon-black ball bearings - Noncorrosive soft spring

XD Compass Bracket Laser

Part code : 3600B

Price : £22.00
( price including VAT )

XD Bow Wind Indicator

Part code : 3608XD

Price : £19.00
( price including VAT )

Bow mounted wind indicator for extra sensitivity. Fits to plastic bow fairlead.

XD Padded Toestrap

Part code : 1608HK

Price : £19.00
( price including VAT )

Padded toestrap built using super tough fabric, stitch seam running close to the edge to prevent rolling up of edges. Plastic insert stitched in at the forward end to prevent wear at screw holes.

XD Harken 16mm Air Block

Part code : 1548

Price : £18.00
( price including VAT )

Harken outhaul block and hook - High working loads - Use with small diameter high tech line - Stainless steel sideplates - Stainless steel balls in grooved race - Sheave dia.?16 mm (5/8") - Max line dia.?5 mm (7/32")

XD Harken 16mm Air Block And Fork

Part code : 1544

Price : £17.50
( price including VAT )

Harken base plate turning blocks. - High working loads - Use with small diameter high tech line - Stainless steel sideplates - Stainless steel balls in grooved race - Sheave dia.?16 mm (5/8") - Max line dia.?5 mm (7/32")

XD Block Plate

Part code : 1527

Price : £15.00
( price including VAT )

Base plate for outhaul and cunningham turning blocks.

XD Vectran Traveller

Part code : 1554-3

Price : £14.82
( price including VAT )

Vectran V12. Very light with zero stretch.

XD Harken 16mm Air Block And Becket

Part code : 1543

Price : £13.50
( price including VAT )

Outhaul and Cunningham block. - High working loads - Use with small diameter high tech line - Stainless steel sideplates - Stainless steel balls in grooved race - Sheave dia.?16 mm (5/8") - Max line dia.?5 mm (7/32")

XD Harken 16mm Air Block

Part code : 1545

Price : £13.00
( price including VAT )

Harken outhaul and Cunningham blocks. - High working loads - Use with small diameter high tech line - Stainless steel sideplates - Stainless steel balls in grooved race - Sheave dia.?16 mm (5/8") - Max line dia.?5 mm (7/32")

XD Outhaul Control Line 2

Part code : 1559-6

Price : £12.21
( price including VAT )

Vectran 8 platt polyester. (this is the part you hold)

XD Harken X Treme Fairlead

Part code : 1550

Price : £9.95
( price including VAT )

Fairlead for use with base plate and Cam Matic cleats. - Use cleat from off-center position - Large-diameter/low-friction guides - Stainless steel tubes protect lines

Laser Friction Pad MK2

Part code : 91538

Price : £9.74
( price including VAT )

For every Laser sailor in the world, this is a must have up-grade. The Friction Pad retails at £9.45 and is easily fitted with the supplied screws and clear instructions. You will also need a tube of sealers, this can be ordered at the same time. For all competitors at the Laser World Championships, please call 01327 841610 with your promotional code to obtain your free Friction Pad MK II.

Clew Strap

Part code : 1558

Price : £8.50
( price including VAT )

The Ultimate clew tie down for the laser 1

XD Cunningham Line 2

Part code : 1555-4

Price : £8.43
( price including VAT )

Vectran 8 platt polyester. (this is the part you hold)

XD Toestrap Adjuster

Part code : 1554-1.6

Price : £8.18
( price including VAT )

Vectran V12. Perfect to set up an adjustable toestrap system.

XD Outhaul Primary Control Line

Part code : 1556-1.5

Price : £6.90
( price including VAT )

1.5m of 4mm Excel V12 Vectran. (this is the part you don't hold)

XD Cunningham Primary Line

Part code : 1554-1.2

Price : £6.39
( price including VAT )

1.2m of 6mm Excel V12 Vectran. (this is the part you don't hold)

XD Kicker Primary Control Line

Part code : 1556-1.45

Price : £6.39
( price including VAT )

1.45m of 4mm Excel Vetran V12. (This is the part of the kicker you don't hold)

XD Centreboard Retaining Line Kit

Part code : 1505XD

Price : £6.00
( price including VAT )

Centreboard shock cord kit. Includes 7mm shockcord and hook.

XD Kicker Control Line 2

Part code : 1552-4.5

Price : £4.85
( price including VAT )

Racing Dynema. (this is the part you hold)

Carbon Tiller Cleat

Part code : 1830

Price : £3.95
( price including VAT )

The becket holds the end of the rope under the cleat. No need for an extra fixing. Small, neat and lightweight. Advanced tooth technology to hold all types of small rope.

XD Rudder Mega Bolt

Part code : 3213XD

Price : £3.90
( price including VAT )

Oversized rudder pivot bolt allows the blade to be more securely clamped in rudder head.

XD Rudder Downhaul Line

Part code : 1557-1.3

Price : £3.83
( price including VAT )

Vectran V12.

XD Curved Kicker Key

Part code : 1365C

Price : £3.50
( price including VAT )

6mm mainsheet sheetline

Part code : 81094

Price : £1.91
( price including VAT )

Price per meter
Manufacturer : Southern Ropes
Southern Ropes designed this new Laser mainsheet with the help of Paul Goodison. The rope has a treated and heat set Dyneema braided core with a blended cover of high tenacity spun and continuous filament polyester to create a very grippy and soft rope. The rope runs through the blocks very easily and its unique grip makes using this 6mm rope very manageable in strong wind conditions. Please note the Laser 1 Mainsheet is 13.5m long.

5.5mm sheetline main sheet

Part code : 81084

Price : £1.91
( price including VAT )

Price is per meter
Manufacturer : Southern Ropes
Southern Ropes designed this new Laser mainsheet with the help of Paul Goodison. The rope has a treated and heat set Dyneema braided core with a blended cover of high tenacity spun and continuous filament polyester to create a very grippy and soft rope. The rope runs through the blocks very easily and its unique grip makes using this 6mm rope very manageable in strong wind conditions. Please note the Laser 1 Mainsheet is 13.5m long.

XD Rigid Spring

Part code : 1542

Price : £1.50
( price including VAT )

Extra rigid spring to keep any ratchet block upright

XD Outhaul or Toestrap 7mm Bungee

Part code : 0522-1

Price : £1.02
( price including VAT )

Powerful shock cord for increased performance when easing the outhaul. Also used for tensioning toestrap.